perkins2806氣門導管
Valve guides
To remove and to fit
Special requirements
Operation -9
|
Special tools |
|
|
Description |
Part number |
|
Removal/installation tool |
GE5004 |
|
Sleeve |
GE50044 |
To remove
Remove the cylinder head, Operation -5.
2 Remove the valves, Operation -7.
Use the special tool (A), GE5004, and a hammer to drive the valve guide (A2) from the cylinder head.
To fit
Apply clean engine oil to the outside diameter of the new valve guides.
2800
2 Use the special tool (B), GE5004, together with the sleeve (B2), GE50044, to install the valve guide. The
guide must protrude from the cylinder head, as shown (C), by 5,0 +/- 0,5 mm (.8 +/- 0.02 in).
Refer to Chapter 2, Specifications for the correct dimensions for the inside diameter of new and used valve
guides.
When a new valve guide has been fitted, check that there is full contact between the valve and the valve
seat. If necessary, lap the valve to the seat.
4 Fit the valves, Operation -7.
5 Fit the cy linder head, Operation -5.
TAD1241GE氣門，發電機組2506C E15TAG3配件，帕金斯4008TAG 2配件，Perkins 403c氣缸墊
Perkins 1106C油管，沃爾沃柴油發電機配件供應商 ，帕金斯配件濟南，鉑金斯發動機驅軸油封，珀金斯柴油機濾芯，帕金斯機油濾清，帕金斯中冷增壓器多少錢，perkins 2614b562皮帶
